PIV Unit Installation

Nationwide · England, Scotland & Wales

PIV Unit Installation across the UK

Cut condensation and mould with a properly fitted PIV unit.

In short

PIV Unit Installation is the fitting of a positive input ventilation system, a low-energy fan that draws fresh, filtered air from the loft or outside and gently pushes it into a home through a ceiling or wall diffuser. The slight positive pressure dilutes moist air and pushes it out through natural leakage, reducing condensation, mould and stale smells.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free PIV Unit Installation quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

Streaming windows, black mould in bedroom corners and a musty smell in winter are usually signs of too much moisture and too little air movement. A positive input ventilation unit tackles this by supplying a steady flow of filtered air, usually from the loft, into a central landing or hallway. We arrange PIV installation through a network of vetted, insured local installers who assess your home, recommend the right unit and fit it neatly in a few hours.

PIV is not a cure for everything. If damp is caused by a leaking gutter, bridged cavity or failed damp-proof course, a fan will not fix it. That is why every installer starts by looking at the cause, checking extract fans in the kitchen and bathroom, and explaining what to expect. Most houses suit a loft-mounted unit; flats and homes without lofts use a wall-mounted model. Request a quote and we will match you with a local installer.

How it works

  1. Request a quote

    Tell us about your home, where condensation or mould appears, whether you have a loft, and whether you rent or own. Photos of mould and the loft hatch help the installer plan.

  2. Home assessment

    A local installer checks the causes of damp, the loft or wall position, power supply and existing extract fans, then recommends the right unit and airflow setting.

  3. Fixed quote

    You receive a single all-in price covering the unit, ducting, diffuser, electrical connection and making good, with the model named and expected fitting time.

  4. Installation

    The installer fits the unit, cuts the diffuser opening, connects power on a fused spur and commissions the fan at the right speed. Most jobs take half a day.

  5. Settle in and review

    Condensation usually reduces over a few weeks as the home dries out. You get advice on settings and filter changes, and can ask for adjustments if needed.

PIV Unit Installation prices

PIV installation is usually priced as a fixed job covering the unit, diffuser, ducting, electrical connection and labour. The main differences come from the type of unit, whether it needs a heater or humidity control, and how easy it is to reach the loft or core-drill a wall. Your installer confirms the model and a single all-in price after assessing your home.

JobGuide priceNotes
Loft-mounted PIV unit, supplied and fitted£650–£1,100Standard house unit with heater, diffuser, ducting and connection to an existing power supply.
Wall-mounted PIV for flats£750–£1,250Includes core drilling, external grille, sleeve sealing, unit with heater and making good inside.
New fused spur in the loft£120–£250Only needed if there is no suitable power supply nearby; work done to BS 7671.
Extract fan replacement£180–£350Humidity-controlled or continuous-running fan in an existing position, ducted outside.
PIV service and filter changefrom £90Filter replacement, cleaning, heater check and airflow adjustment for an existing unit.
Condensation assessment visitfrom £75Humidity readings and cause diagnosis; often waived if you go ahead with installation.

What affects the price →

Who we work for

Homeowners

Families tired of wiping windows every morning and treating mould in bedrooms, who want a quiet, low-running-cost fix that does not mean opening windows all winter.

Landlords

Landlords responding to tenant complaints about condensation and mould, who need a practical, quick fix and clear paperwork showing the problem has been addressed.

Housing associations

Social landlords tackling damp and mould across their stock, who need consistent installs, assessment notes and units suited to both houses and flats.

Flat owners

Owners of flats and maisonettes with no loft space, who need a wall-mounted unit and help understanding what permissions the building's freeholder may require.

Allergy sufferers

Households where dust mites, pollen or mould spores trigger symptoms, who want filtered air supplied into the home and lower indoor humidity.

Rules and standards that apply

  • Approved Document F of the Building Regulations in England sets ventilation requirements, including minimum extract rates for kitchens and bathrooms when fans are installed or replaced.
  • Adding a new electrical spur for a PIV unit must be done to BS 7671, the IET Wiring Regulations, and certain new circuits are notifiable under Part P of the Building Regulations in England and Wales.
  • In England, landlords must keep rented homes free from serious hazards under the Housing Health and Safety Rating System, which includes damp and mould growth.

How to choose the right piv unit installation company

  • Choose an installer who checks the cause of damp first, rather than recommending a PIV unit without looking.
  • Ask which make and model is proposed and whether it includes a heater and summer bypass.
  • Confirm that electrical work will be done by a qualified electrician and certified to BS 7671.
  • Check where the diffuser will go; a central landing or hallway position works far better than a corner.
  • Make sure the quote covers ducting, diffuser, power connection and making good, with no extras on the day.
  • Ask how often the filter needs changing and how much a replacement costs.

Frequently asked questions

What is a PIV unit?

A PIV unit is a positive input ventilation fan that supplies fresh, filtered air into a home, usually from the loft through a ceiling diffuser on the landing. It creates gentle positive pressure that pushes moist, stale air out through natural gaps. This dilutes humidity and reduces condensation and mould without needing windows open.

Does a PIV unit really stop condensation?

A correctly sized and set PIV unit reduces condensation in most homes where the cause is high indoor humidity and poor ventilation. Results usually show within a few weeks. It will not fix damp caused by leaks, rising damp or failed pointing, so those need repairing separately. Working extract fans in kitchens and bathrooms help it work best.

How much does it cost to run a PIV unit?

The fan in a typical PIV unit uses very little electricity, comparable to a low-energy light bulb, so running costs are small. The heater, if fitted, adds cost when it switches on during cold weather, which is why its trigger temperature can be adjusted. Your installer can explain the settings and expected running costs for your chosen model.

Will a PIV unit make my house cold?

A PIV unit should not make a house noticeably colder when set correctly. Loft air is usually warmer than outside air, and many units have a heater that tempers incoming air in cold weather. Drier air also feels warmer and heats up faster. If the diffuser feels draughty, the installer can lower the speed or adjust the heater setting.

Can you fit a PIV unit in a flat?

Yes, flats use a wall-mounted PIV unit that draws air directly from outside through a cored hole in an external wall. It works on the same principle as a loft unit. In a block of flats, you will usually need the freeholder's or managing agent's permission to drill the external wall, so check your lease first.

How long does PIV installation take?

A loft-mounted PIV unit usually takes two to four hours to install, including fitting the unit, cutting the diffuser, running ducting and connecting power. Wall-mounted units in flats take a little longer because of core drilling and making good, typically three to five hours. Adding a new electrical spur can add an hour or two.

Where should a PIV diffuser go?

The diffuser should go in a central position on the landing or in the hallway ceiling, so fresh air can spread to every room. Avoid placing it directly above a bed, in a small closed room or in a corner. In bungalows, the central hallway is usually best. A good installer chooses the spot after looking at the layout.

Are PIV units noisy?

Modern PIV units are quiet on normal settings, usually producing a soft whoosh at the diffuser rather than fan noise. Anti-vibration mounts in the loft stop hum travelling through joists. Units can become noisy if set too high, if ducting is kinked or if bearings wear with age. Most noise problems are fixed by adjusting the speed or replacing an old unit.

See all FAQs →

Get a free piv unit installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote