PIV Unit Installation
Wall-Mounted PIV for Flats
A through-wall positive input unit for flats, maisonettes and homes without a loft, drawing fresh air directly from outside.

What's involved
Flats and homes without a usable loft need a wall-mounted PIV. The installer core-drills a hole of around 100 to 150mm through an external wall, usually in a hallway, and fits a weatherproof grille outside. The unit draws fresh air in through a filter, warms it with a built-in heater when needed and releases it into the flat. Because the air comes straight from outside rather than a warm loft, heater settings matter more for comfort in winter. Core drilling needs care around cavity walls, insulation and wiring, and in a block of flats you may need the freeholder's or managing agent's permission to make a hole in the external wall. The job usually takes three to five hours, including making good inside and sealing the sleeve through the cavity so no damp tracks in.
How we handle it
Request a quote
Tell us about your home, where condensation or mould appears, whether you have a loft, and whether you rent or own. Photos of mould and the loft hatch help the installer plan.
Home assessment
A local installer checks the causes of damp, the loft or wall position, power supply and existing extract fans, then recommends the right unit and airflow setting.
Fixed quote
You receive a single all-in price covering the unit, ducting, diffuser, electrical connection and making good, with the model named and expected fitting time.
Installation
The installer fits the unit, cuts the diffuser opening, connects power on a fused spur and commissions the fan at the right speed. Most jobs take half a day.
Settle in and review
Condensation usually reduces over a few weeks as the home dries out. You get advice on settings and filter changes, and can ask for adjustments if needed.
Price guide
PIV installation is usually priced as a fixed job covering the unit, diffuser, ducting, electrical connection and labour. The main differences come from the type of unit, whether it needs a heater or humidity control, and how easy it is to reach the loft or core-drill a wall. Your installer confirms the model and a single all-in price after assessing your home.
- Loft-mounted PIV unit, supplied and fitted: £650–£1,100. Standard house unit with heater, diffuser, ducting and connection to an existing power supply.
- Wall-mounted PIV for flats: £750–£1,250. Includes core drilling, external grille, sleeve sealing, unit with heater and making good inside.
- New fused spur in the loft: £120–£250. Only needed if there is no suitable power supply nearby; work done to BS 7671.
Questions about wall-mounted piv for flats
What is a PIV unit?
A PIV unit is a positive input ventilation fan that supplies fresh, filtered air into a home, usually from the loft through a ceiling diffuser on the landing. It creates gentle positive pressure that pushes moist, stale air out through natural gaps. This dilutes humidity and reduces condensation and mould without needing windows open.
Are PIV units noisy?
Modern PIV units are quiet on normal settings, usually producing a soft whoosh at the diffuser rather than fan noise. Anti-vibration mounts in the loft stop hum travelling through joists. Units can become noisy if set too high, if ducting is kinked or if bearings wear with age. Most noise problems are fixed by adjusting the speed or replacing an old unit.
How much does it cost to run a PIV unit?
The fan in a typical PIV unit uses very little electricity, comparable to a low-energy light bulb, so running costs are small. The heater, if fitted, adds cost when it switches on during cold weather, which is why its trigger temperature can be adjusted. Your installer can explain the settings and expected running costs for your chosen model.
Other services
Loft-Mounted PIV Installation
A PIV fan placed in the loft space, ducted to a ceiling diffuser on the landing, supplying filtered, tempered air to the whole house.
Condensation and Mould Assessment
A home visit to find out what is causing condensation and mould, and whether PIV, extract fans or a building repair is the right fix.
Bathroom and Kitchen Extract Fans
Fitting or upgrading extract fans in wet rooms to work alongside a PIV unit and remove moisture at source.
PIV Servicing and Filter Changes
Routine filter replacement, cleaning and settings checks to keep a PIV unit running quietly and efficiently.
Replacement and Upgrade of Old Units
Swapping noisy, failing or basic older PIV units for quieter models with heaters, humidity control and better filters.
Wall-Mounted PIV for Flats near you
Get a free piv unit installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote