PIV Unit Installation
Replacement and Upgrade of Old Units
Swapping noisy, failing or basic older PIV units for quieter models with heaters, humidity control and better filters.

What's involved
Older PIV units can become noisy as bearings wear, and early models often lack heaters, which can make winter air feel chilly at the diffuser. Replacing a unit is usually quick because the ducting, diffuser position and electrical spur are already there. The installer removes the old fan, checks the duct and fixings, fits the new unit and sets it up. Newer models offer variable speed control, heaters with adjustable thresholds, summer bypass to stop warm loft air being pushed down in hot weather, and in some cases humidity sensing that increases airflow automatically. Some also have remote controls or wall controllers. A straight swap typically takes one to two hours. If the old diffuser was badly placed, such as in a corner, the installer may suggest moving it to a more central spot.
How we handle it
Request a quote
Tell us about your home, where condensation or mould appears, whether you have a loft, and whether you rent or own. Photos of mould and the loft hatch help the installer plan.
Home assessment
A local installer checks the causes of damp, the loft or wall position, power supply and existing extract fans, then recommends the right unit and airflow setting.
Fixed quote
You receive a single all-in price covering the unit, ducting, diffuser, electrical connection and making good, with the model named and expected fitting time.
Installation
The installer fits the unit, cuts the diffuser opening, connects power on a fused spur and commissions the fan at the right speed. Most jobs take half a day.
Settle in and review
Condensation usually reduces over a few weeks as the home dries out. You get advice on settings and filter changes, and can ask for adjustments if needed.
Price guide
PIV installation is usually priced as a fixed job covering the unit, diffuser, ducting, electrical connection and labour. The main differences come from the type of unit, whether it needs a heater or humidity control, and how easy it is to reach the loft or core-drill a wall. Your installer confirms the model and a single all-in price after assessing your home.
- PIV service and filter change: from £90. Filter replacement, cleaning, heater check and airflow adjustment for an existing unit.
- Condensation assessment visit: from £75. Humidity readings and cause diagnosis; often waived if you go ahead with installation.
- Loft-mounted PIV unit, supplied and fitted: £650–£1,100. Standard house unit with heater, diffuser, ducting and connection to an existing power supply.
Questions about replacement and upgrade of old units
Are PIV units noisy?
Modern PIV units are quiet on normal settings, usually producing a soft whoosh at the diffuser rather than fan noise. Anti-vibration mounts in the loft stop hum travelling through joists. Units can become noisy if set too high, if ducting is kinked or if bearings wear with age. Most noise problems are fixed by adjusting the speed or replacing an old unit.
Other services
Loft-Mounted PIV Installation
A PIV fan placed in the loft space, ducted to a ceiling diffuser on the landing, supplying filtered, tempered air to the whole house.
Wall-Mounted PIV for Flats
A through-wall positive input unit for flats, maisonettes and homes without a loft, drawing fresh air directly from outside.
Condensation and Mould Assessment
A home visit to find out what is causing condensation and mould, and whether PIV, extract fans or a building repair is the right fix.
Bathroom and Kitchen Extract Fans
Fitting or upgrading extract fans in wet rooms to work alongside a PIV unit and remove moisture at source.
PIV Servicing and Filter Changes
Routine filter replacement, cleaning and settings checks to keep a PIV unit running quietly and efficiently.
Replacement and Upgrade of Old Units near you
Get a free piv unit installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote