PIV Unit Installation
Bathroom and Kitchen Extract Fans
Fitting or upgrading extract fans in wet rooms to work alongside a PIV unit and remove moisture at source.

What's involved
PIV works best when moisture is removed where it is made. Kitchens and bathrooms produce most of a home's water vapour, and many extract fans are undersized, blocked or ducted only into the loft. The installer can fit a new fan with a humidity sensor or run-on timer, ducted properly to an outside wall or roof tile vent. Continuous-running, low-energy fans are a popular choice because they quietly extract all the time and boost when the room gets humid. Building Regulations set minimum extract rates for kitchens and bathrooms, and a competent installer will size the fan to suit. Fitting a replacement fan in an existing position takes one to two hours; a new position with ducting through a wall or ceiling takes longer. Combining fans with PIV in a single visit often saves on labour.
How we handle it
Request a quote
Tell us about your home, where condensation or mould appears, whether you have a loft, and whether you rent or own. Photos of mould and the loft hatch help the installer plan.
Home assessment
A local installer checks the causes of damp, the loft or wall position, power supply and existing extract fans, then recommends the right unit and airflow setting.
Fixed quote
You receive a single all-in price covering the unit, ducting, diffuser, electrical connection and making good, with the model named and expected fitting time.
Installation
The installer fits the unit, cuts the diffuser opening, connects power on a fused spur and commissions the fan at the right speed. Most jobs take half a day.
Settle in and review
Condensation usually reduces over a few weeks as the home dries out. You get advice on settings and filter changes, and can ask for adjustments if needed.
Price guide
PIV installation is usually priced as a fixed job covering the unit, diffuser, ducting, electrical connection and labour. The main differences come from the type of unit, whether it needs a heater or humidity control, and how easy it is to reach the loft or core-drill a wall. Your installer confirms the model and a single all-in price after assessing your home.
- New fused spur in the loft: £120–£250. Only needed if there is no suitable power supply nearby; work done to BS 7671.
- Wall-mounted PIV for flats: £750–£1,250. Includes core drilling, external grille, sleeve sealing, unit with heater and making good inside.
- Loft-mounted PIV unit, supplied and fitted: £650–£1,100. Standard house unit with heater, diffuser, ducting and connection to an existing power supply.
Questions about bathroom and kitchen extract fans
Do I still need extract fans if I have PIV?
Yes, extract fans in kitchens and bathrooms are still important with PIV. They remove moisture at source, while PIV dilutes humidity across the rest of the house. Building Regulations require adequate extraction in wet rooms. If your existing fans are weak or not ducted outside, upgrading them alongside a PIV unit gives much better results.
Other services
Loft-Mounted PIV Installation
A PIV fan placed in the loft space, ducted to a ceiling diffuser on the landing, supplying filtered, tempered air to the whole house.
Wall-Mounted PIV for Flats
A through-wall positive input unit for flats, maisonettes and homes without a loft, drawing fresh air directly from outside.
Condensation and Mould Assessment
A home visit to find out what is causing condensation and mould, and whether PIV, extract fans or a building repair is the right fix.
PIV Servicing and Filter Changes
Routine filter replacement, cleaning and settings checks to keep a PIV unit running quietly and efficiently.
Replacement and Upgrade of Old Units
Swapping noisy, failing or basic older PIV units for quieter models with heaters, humidity control and better filters.
Bathroom and Kitchen Extract Fans near you
Get a free piv unit installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote