PIV Unit Installation glossary
The terms you'll come across, explained in plain English.
- Approved Document F
- The part of the Building Regulations guidance in England covering ventilation, including minimum extract rates for kitchens and bathrooms and background ventilation requirements.
- Black mould
- A common name for dark mould growth caused by persistent damp surfaces, often from condensation. It needs cleaning off and the underlying moisture problem fixing.
- Condensation
- Water that forms when warm, moist air touches a surface colder than its dew point, such as windows, external corners and the backs of wardrobes on outside walls.
- Core drilling
- Cutting a clean, round hole through a wall with a diamond core drill. Wall-mounted PIV units need one through an external wall to draw in outside air.
- Dew point
- The temperature at which air can no longer hold its moisture and water starts to form on surfaces. Lower humidity means a lower dew point and less condensation.
- Diffuser
- The round grille fitted in the ceiling or wall where air from a PIV unit enters the living space. It spreads the airflow so it does not feel like a draught.
- Extract fan
- A fan in a kitchen or bathroom that removes moist air at source and ducts it outside. Building Regulations set minimum extract rates when fans are installed or replaced.
- Fused spur
- A fixed electrical connection with its own fuse that supplies a single appliance, such as a PIV unit in the loft. New spurs must be installed to BS 7671.
- HHSRS
- The Housing Health and Safety Rating System, used in England to assess hazards in homes, including damp and mould growth. Councils can require landlords to remove serious hazards.
- MVHR
- Mechanical ventilation with heat recovery. A ducted whole-house system that extracts stale air and supplies fresh air through a heat exchanger, best suited to new or very airtight homes.
- Positive input ventilation (PIV)
- A ventilation system that gently supplies filtered air into a home from the loft or outside, creating slight positive pressure that pushes moist, stale air out through natural gaps.
- Positive pressure
- A slightly higher air pressure inside the house than outside. It makes air flow outwards through small gaps, carrying moisture with it instead of letting it settle.
- Relative humidity
- How much moisture the air holds compared with the maximum it could hold at that temperature, shown as a percentage. High readings over long periods encourage mould.
- Summer setting
- A feature that reduces airflow or stops the unit pushing in loft air when it is hotter than a set temperature, avoiding warm air entering the house on hot days.
- Tempering heater
- A small heater built into many PIV units that warms incoming air when it falls below a set temperature, so the supply stays comfortable in cold weather.
- Trickle vent
- A small slotted vent, usually in a window frame, that allows a steady low level of background ventilation even when the window is closed.
Get a free piv unit installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote