PIV Unit Installation
Loft-Mounted PIV Installation
A PIV fan placed in the loft space, ducted to a ceiling diffuser on the landing, supplying filtered, tempered air to the whole house.

What's involved
This is the standard setup for houses and bungalows with an accessible loft. The unit sits on a cross-beam or hangs from a rafter, with anti-vibration mounts to reduce noise. A short flexible duct runs to a round diffuser cut into the landing or hallway ceiling, as central as possible so air spreads to every room. The loft acts as a pre-heater: air there is usually a few degrees warmer than outside, and many units add a small heater that switches on when loft air is very cold. The installer connects the unit to a fused spur, sets the airflow to suit the size of the house and checks the diffuser. Most loft installs take two to four hours. You will need to clear a path to the loft hatch and make sure there is safe boarding near where the unit will sit.
How we handle it
Request a quote
Tell us about your home, where condensation or mould appears, whether you have a loft, and whether you rent or own. Photos of mould and the loft hatch help the installer plan.
Home assessment
A local installer checks the causes of damp, the loft or wall position, power supply and existing extract fans, then recommends the right unit and airflow setting.
Fixed quote
You receive a single all-in price covering the unit, ducting, diffuser, electrical connection and making good, with the model named and expected fitting time.
Installation
The installer fits the unit, cuts the diffuser opening, connects power on a fused spur and commissions the fan at the right speed. Most jobs take half a day.
Settle in and review
Condensation usually reduces over a few weeks as the home dries out. You get advice on settings and filter changes, and can ask for adjustments if needed.
Price guide
PIV installation is usually priced as a fixed job covering the unit, diffuser, ducting, electrical connection and labour. The main differences come from the type of unit, whether it needs a heater or humidity control, and how easy it is to reach the loft or core-drill a wall. Your installer confirms the model and a single all-in price after assessing your home.
- Wall-mounted PIV for flats: £750–£1,250. Includes core drilling, external grille, sleeve sealing, unit with heater and making good inside.
- Loft-mounted PIV unit, supplied and fitted: £650–£1,100. Standard house unit with heater, diffuser, ducting and connection to an existing power supply.
- Condensation assessment visit: from £75. Humidity readings and cause diagnosis; often waived if you go ahead with installation.
Questions about loft-mounted piv installation
How long does PIV installation take?
A loft-mounted PIV unit usually takes two to four hours to install, including fitting the unit, cutting the diffuser, running ducting and connecting power. Wall-mounted units in flats take a little longer because of core drilling and making good, typically three to five hours. Adding a new electrical spur can add an hour or two.
Other services
Wall-Mounted PIV for Flats
A through-wall positive input unit for flats, maisonettes and homes without a loft, drawing fresh air directly from outside.
Condensation and Mould Assessment
A home visit to find out what is causing condensation and mould, and whether PIV, extract fans or a building repair is the right fix.
Bathroom and Kitchen Extract Fans
Fitting or upgrading extract fans in wet rooms to work alongside a PIV unit and remove moisture at source.
PIV Servicing and Filter Changes
Routine filter replacement, cleaning and settings checks to keep a PIV unit running quietly and efficiently.
Replacement and Upgrade of Old Units
Swapping noisy, failing or basic older PIV units for quieter models with heaters, humidity control and better filters.
Loft-Mounted PIV Installation near you
Get a free piv unit installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote