Bristol · South West
PIV Unit Installation in Bristol
Black mould in the bedroom of your Bristol home? A local installer can assess it and recommend whether PIV is the right fix.
Bristol and the surrounding area
Bristol falls within Bristol, South West. Jobs here are mostly in the BS5, BS4, BS3, BS9, BS7 and BS13 postcode areas. We also take jobs in Fishponds, Filton, Pill, Long Ashton and Two Mile Hill.
Working in Bristol
Many homes in central Bristol are flats without lofts, so installers often fit wall-mounted PIV units and check freeholder permission first. In busy parts of Bristol, installers bring compact kit and park where they can; a loft install needs only a van and a ladder.
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. In pre-war houses in Bristol, installers check loft insulation and old wiring before fitting a PIV unit and its power supply.
Our services in Bristol
Wall-Mounted PIV for Flats
A through-wall positive input unit for flats, maisonettes and homes without a loft, drawing fresh air directly from outside.
Condensation and Mould Assessment
A home visit to find out what is causing condensation and mould, and whether PIV, extract fans or a building repair is the right fix.
Bathroom and Kitchen Extract Fans
Fitting or upgrading extract fans in wet rooms to work alongside a PIV unit and remove moisture at source.
PIV Servicing and Filter Changes
Routine filter replacement, cleaning and settings checks to keep a PIV unit running quietly and efficiently.
Replacement and Upgrade of Old Units
Swapping noisy, failing or basic older PIV units for quieter models with heaters, humidity control and better filters.
Loft-Mounted PIV Installation
A PIV fan placed in the loft space, ducted to a ceiling diffuser on the landing, supplying filtered, tempered air to the whole house.
Guide prices for Bristol
- New fused spur in the loft: £120–£250. Only needed if there is no suitable power supply nearby; work done to BS 7671.
- Extract fan replacement: £180–£350. Humidity-controlled or continuous-running fan in an existing position, ducted outside.
- PIV service and filter change: from £90. Filter replacement, cleaning, heater check and airflow adjustment for an existing unit.
Prices are a guide. Your quote for Bristol is a fixed price based on the details you give us. Full price guide.
PIV Unit Installation questions from Bristol
Can you service my existing PIV unit in Bristol?
Yes. Installers serving Bristol and Stoke Gifford can service existing PIV units, change filters, clean the fan and adjust settings. Services typically start from £90. Tell us the make and model if you know it.
Is a PIV unit suitable for my bungalow in Bristol?
Bungalows in Bristol are well suited to loft-mounted PIV units because the loft sits directly above all rooms. The diffuser usually goes in the central hallway. The installer will check loft access and insulation during the visit.
Why is condensation so bad in my Bristol home?
Condensation in Bristol homes usually comes from moisture produced by cooking, bathing and drying clothes, combined with closed windows in cold weather and poor extraction. New windows and insulation can make it worse by reducing draughts. A local installer can measure humidity and explain what is happening.
Can landlords in Bristol get PIV fitted quickly?
Yes. Landlords in Bristol often need fast action on tenant complaints about condensation and mould. Installers can arrange access with tenants directly once you approve, and provide notes on what was found and fitted for your records.
How much does it cost to run a PIV unit?
The fan in a typical PIV unit uses very little electricity, comparable to a low-energy light bulb, so running costs are small. The heater, if fitted, adds cost when it switches on during cold weather, which is why its trigger temperature can be adjusted. Your installer can explain the settings and expected running costs for your chosen model.
Are PIV units noisy?
Modern PIV units are quiet on normal settings, usually producing a soft whoosh at the diffuser rather than fan noise. Anti-vibration mounts in the loft stop hum travelling through joists. Units can become noisy if set too high, if ducting is kinked or if bearings wear with age. Most noise problems are fixed by adjusting the speed or replacing an old unit.
Helpful guides
How Much Does a PIV Unit Cost to Install in the UK?
A loft-mounted PIV unit typically costs £650–£1,100 supplied and fitted in the UK, including the unit, heater, diffuser, ducting and…
Read the guide →Damp and Mould in Rented Homes: A Landlord's Guide to PIV Units
Landlords in England must keep rented homes free from serious hazards under the Housing Health and Safety Rating System, which includes…
Read the guide →Get a free piv unit installation quote in Bristol
Tell us what you need and we'll come back with a clear price.
Request a quote