PIV Unit Installation

Guide · Landlords · 3 min read · Updated 17 November 2026

Damp and Mould in Rented Homes: A Landlord's Guide to PIV Units

Short answer

Landlords in England must keep rented homes free from serious hazards under the Housing Health and Safety Rating System, which includes damp and mould growth. Where mould comes from condensation, a PIV unit is a practical fix because it ventilates continuously without relying on tenants. A loft unit costs £650–£1,100 fitted and a wall unit for flats £750–£1,250. Rule out leaks and rising damp first.

Damp and Mould in Rented Homes: A Landlord's Guide to PIV Units

Your legal duties

In England, damp and mould growth is one of the hazards assessed under the Housing Health and Safety Rating System. Councils can require landlords to deal with serious hazards, and the Homes (Fitness for Human Habitation) Act 2018 lets tenants take action where a home is unfit, including because of damp. Social landlords in England also face strict timescales for investigating and fixing damp and mould under Awaab's Law, which began applying to the social rented sector in October 2025.

Wales, Scotland and Northern Ireland have their own housing standards, but all expect rented homes to be free from serious damp. The practical message is the same everywhere: investigate complaints promptly, find the cause and fix it.

Find the cause before choosing a fix

Mould in rented homes is often blamed on tenants drying washing or not opening windows. Sometimes that is part of it, but leaks, defective guttering, failed pointing, missing loft insulation and broken extract fans are just as common. A PIV unit only fixes condensation, so it is worth ruling out building defects first.

A condensation assessment, from £75, records humidity readings, surface temperatures and the pattern of mould. Condensation mould tends to appear in cold corners, behind furniture on outside walls, on window reveals and in bathrooms. Damp from leaks or rising damp has different patterns and needs a different repair.

  • Check gutters, downpipes, roof and pointing for leaks
  • Test kitchen and bathroom extract fans
  • Look for missing or slumped loft insulation
  • Note where mould appears and when it is worst

Why PIV suits rental properties

The key advantage for landlords is that a PIV unit works without tenant involvement. It runs continuously at low speed, there is no tank to empty and no switch to forget. It treats the whole home rather than one room and keeps working between tenancies. Running costs fall to whoever pays the electricity, but the fan uses very little power.

Pair it with working extract fans in the kitchen and bathroom. Humidity-controlled or continuous-running fans remove moisture at source, while PIV dilutes what remains. Together they address the most common causes of condensation mould in rented homes.

Costs for typical rental properties

The table shows typical guide prices. Portfolio landlords may be able to schedule several properties together, but each home still needs its own assessment.

Property typeTypical solutionGuide price
Terraced or semi-detached houseLoft-mounted PIV£650–£1,100
Purpose-built flatWall-mounted PIV£750–£1,250
House with weak bathroom fanLoft PIV plus fan replacement£830–£1,450
Loft with no power supplyPIV plus new fused spuradd £120–£250
Existing unit needing attentionService and filter changefrom £90

Record keeping and tenant communication

Keep a clear paper trail. Record when a complaint was made, what was inspected, what was found and what work was done, with dated photographs before and after. Keep the installation paperwork, electrical certificate for any new spur, and service records for the unit. If the council or a tenant later questions your response, this evidence shows you acted.

Explain to tenants what the unit does and ask them not to switch it off at the spur. A short note on the consumer unit or near the isolator helps. Encourage them to report any returning mould early, so a cold bridge or hidden leak can be checked.

Common mistakes landlords make

The most frequent mistake is treating mould as a cleaning problem. Wiping or painting over it without dealing with the cause means it returns within weeks, and repeated complaints with no lasting fix can look like neglect. Another is blaming the tenant's lifestyle without checking the building, when a broken bathroom fan or a missing section of loft insulation is the real driver.

Some landlords fit a cheap fan without a heater, set it to the lowest speed and leave. Tenants then feel a cold draught on the landing, switch it off at the spur and the condensation returns. A unit with a tempering heater, properly commissioned and explained, avoids this.

  • Painting over mould without fixing the cause
  • Assuming tenant behaviour is the only factor
  • Ignoring broken or missing extract fans
  • Choosing a unit with no heater for a cold property
  • Leaving no explanation for tenants

Arranging installation

We arrange assessments and PIV installation through vetted, insured local installers across the UK. Access can be coordinated with tenants or managing agents, and you receive one all-in price per property before work starts. Installers can also replace failing extract fans at the same visit, so the whole ventilation picture is dealt with in one trip.

Tell us the property type, whether it has a usable loft, which rooms are affected and how to arrange access when you request a quote. For leasehold flats, confirm whether the freeholder's consent is needed for a wall-mounted unit.

Questions people also ask

Can a tenant refuse a PIV unit being fitted?

Tenants must normally allow reasonable access for repairs and improvements after proper notice, as set out in most tenancy agreements and housing law. Explaining that the unit reduces mould, runs quietly and costs little to run usually resolves concerns. Agree a convenient time and give written notice.

Who pays to run a PIV unit in a rental?

Whoever pays the electricity bill, usually the tenant. The fan itself uses very little power, so the cost is small. The heater adds cost on cold days, and its trigger temperature can be set to balance comfort and running cost. Explain this to tenants when the unit is fitted.

Does fitting PIV prove I have dealt with a damp complaint?

Not on its own. You need to show you investigated, identified the cause and carried out a suitable repair. If the cause was condensation, a properly installed PIV unit with working extract fans is a reasonable response. Keep records of the assessment, the work and any follow-up checks.

Written and checked by the PIV Unit Installation team. Read our editorial policy.

Get a free piv unit installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote